RSL R.S. Oil Tolerant Primer


R.S. Oil Tolerant Primer is a two-component epoxy resin membrane that is tolerant of residual oil contamination in concrete floors. R.S. Oil Tolerant Primer will protect the floor by ensuring that the oil contaminates will not come through and affect top finishes.

Make an enquiry

What the experts have to say

Being Green
The natural durability of a resin floor means it's often in place for many years without needing to be replaced, avoiding all the environmental costs involved in uplifting an existing floor, manufacturing a replacement one and installing it again. If you do have to refurbish a resin system, it is easily reapplied over the existing surface. Using resin is proven to reduce waste and energy costs.
  • Enables resin finishes to be applied onto concrete that has previously been contaminated with engineering oils

  • Completely solvent free and low odour

  • Can be applied onto substrates with hygrometer readings up to 85% RH

  • Easily applied by brush, roller or trowel edge

System thickness (dry):
200 microns
Pack sizes:
4 kg. & 8 kg.
Pack make up:

1 x Base

1 x Hardener

Coverage rate:
4 Kg. will cover 16 m2 @ 200 microns thickness
Pot life:
30 Minutes from mixing
Recoat time:
8 hours or once surface has lost tackiness
Full traffic:
72 Hours
Full chemical cure:
Up to 7 Days
Full Information:
Check out the full datasheet available in the Downloads section!

Related Products