RSL R.S. Dampshield F


R.S. Dampshield F is a fast curing two-component epoxy resin surface applied membrane that is tolerant of residual moisture in concrete floors. This enables earlier access onto new concrete substrates for the application of screeds, coatings and other floor coverings including carpets, tiles, vinyl and wood.

Make an enquiry

What the experts have to say

Being Green
The natural durability of a resin floor means it's often in place for many years without needing to be replaced, avoiding all the environmental costs involved in uplifting an existing floor, manufacturing a replacement one and installing it again. If you do have to refurbish a resin system, it is easily reapplied over the existing surface. Using resin is proven to reduce waste and energy costs.
  • Easily applied by brush, roller or trowel edge

  • Can be applied onto substrates with hygrometer readings up to 97% RH

  • Completely solvent free and low odour

  • Enables resin coatings to be applied onto new concrete much sooner than the normal time required for concrete to dry

  • In ambient conditions over-coat time of 6 hours

Temperature Resistance:
Tolerant of temperatures up to 60°C
System thickness (dry):
200 microns
Pack sizes:
5 kg. & 15 kg.
Pack make up:

1 x Base

1 x Hardener

Coverage rate:
5 Kg. will cover 20m2 @ 200 microns thickness
Pot life:
15 Minutes from mixing
Recoat time:
6 hours or once surface has lost tackiness at 20°C
Full traffic:
72 Hours at 20°C
Full Information:
Check out the full datasheet available in the Downloads section!

Related Products