RSL Resutop Cold Cure – 2 pack high chemical resistant

RSL Resutop Cold Cure – 2 pack high chemical resistant


Resutop Cold Cure is a fast curing epoxy resin for application at low temperatures down to 5°C. The product is chemically resistant with a heavy duty floor coating at a thickness from 200 to 250 microns. The coating provides a smooth gloss finish to which anti-slip aggregate can be added if required. Applied by roller and paint brush the product is low odour producing a seamless, hard wearing, hygienic floor finish. Resutop is available as a clear coating or in the RSL range of colours.

Make an enquiry

What the experts have to say

Being Green
The natural durability of a resin floor means it's often in place for many years without needing to be replaced, avoiding all the environmental costs involved in uplifting an existing floor, manufacturing a replacement one and installing it again. If you do have to refurbish a resin system, it is easily reapplied over the existing surface. Using resin is proven to reduce waste and energy costs.
  • Fast curing at low temperatures

  • Solvent free

  • Hygienic and easily cleaned

  • Good colour stability

  • No shrinkage on curing

  • Excellent high gloss finish

  • Excellent slip resistance with the inclusion of selected aggregates

Slip Resistance:
Dry > 60
Temperature Resistance:
Tolerant of sustained temperatures of up to 45°C
System thickness (dry):
200 microns (Per coat)
Pack sizes:
2.5 kg. & 5 kg.
Pack make up:
1 X Base / 1 X Hardener
Coverage rate:
5 kg. will cover 20 m2 @ 200 microns thickness
Pot life:
15 Minutes from mixing
Recoat time:
18 hours at 5°C
Life Expectancy:
3-4 years plus. Subjected to Industrial Traffic. RSL terms and conditions will apply
Full Information:
Check out the full datasheet available in the Downloads section!

Related Products