|   

RSL RS Cemcrete – Polymer/Cement based flexible coating

RSL RS Cemcrete – Polymer/Cement based flexible coating

Description

Ease of application with good working time

R.S. Cemcrete is a polymer/cement based product designed to be laid over a wide range of floor and wall surfaces. It provides a durable finish, strongly bonded to the substrate with a degree of flexibility to enable the accommodation of movement in the structure of the building. R.S. Cemcrete can be applied in exterior or interior situations and can be smooth or textured as required, an aggregate can be added if required for texture.

Make an enquiry



What the experts have to say

Being Green
At RSL
The natural durability of a resin floor means it's often in place for many years without needing to be replaced, avoiding all the environmental costs involved in uplifting an existing floor, manufacturing a replacement one and installing it again. If you do have to refurbish a resin system, it is easily reapplied over the existing surface. Using resin is proven to reduce waste and energy costs.
  • Can be built up to achieve a range of thicknesses and finishes in applications

  • Elastomeric allowing for the accommodation of structural movement

  • Water based

  • Ease of application, with good working time and application properties

  • Can be used both internally and externally

  • Can be used as a floor or wall coating

Slip Resistance:
Dry > 75 / Wet > 55 (product dependent)
Temperature Resistance:
Tolerant of sustained temperatures of up to 100°C
Adhesion Strength:
Greater than 2 N/mm2
Elongation at Break:
Base resin 300%
Tensile Strength:
1.0 N/mm2
System thickness:

1000 microns (wet )

650 microns( dry )

Coverage rate:
34 kg. unit will over 19 m2@ 650 microns
Recoat time:
4 - 6 hours in good drying conditions prior to a second coat
Pack sizes:
34 kg. & 68 kg.
Full Information:
Check out the full datasheet available in the Downloads section!

Related Products