|   

Tremco SF404 2 Part Epoxy Adhesive

Tremco SF404 2 Part Epoxy Adhesive

Description

SF404 is a two part epoxy based, self-extinguishing adhesive of thixotropic consistency, formulated for ambient temperature curing. SF404 has been specifically developed for the bonding of all resilient (eg. rubber, vinyl and linoleum) and textile floor coverings in areas of high risk and where public safety is the main consideration.

Make an enquiry


    • Accelerated cure

    • Used with low smoke emission, low toxic floor coverings to give a completely safe installation

    • Solvent free

    • Highly resistant to surface water

    Composition:
    A two part solvent free epoxy based adhesive of thixotropic consistency
    Open Time/Workability (at +20°C):
    45 minutes
    Initial Hardening Time (at 25ºC):
    4 hours
    Specific Gravity:
    1.5 - 1.6
    Flash Point:
    None
    Mixing Ratio:
    01:01
    Service Temperature:
    -20°C to +85°C
    Coverage:
    2 to 2.5 m²/kg using serrated trowel 1.5 mm x 5 mm, 1 m²/kg on coned peduncle back floorings
    Final Bond Strength:
    4 - 6 days
    Full Information:
    Check out the full datasheet available in the Downloads section!

    Related Products