Bond It SealAcryl

Bond It SealAcryl

Description

A one component, UV stable, solvent-based, mutli-purpose roof coating membrane. Designed to prevent the ingress of water whilst allowing any trapped moisture to escape and evaporate naturally. Manufactured with fibre reinforcement pre-dispersed in the can for ease of application.

Make an enquiry


    What the experts have to say

    SEALACRYL
    Application Tip
    Do not thin. Apply SEALACRYL using either a brush or roller. Treat all details first, in areas where excessive movement may occur additional reinforcement can be incorporated into the coating. SEALACRYL can be applied in one coat, but experience has shown that a two coat application ensures a greater uniformity of coating thickness.
    • Excellent adhesion

    • Application in damp weather

    • Instant protection

    • Reinforced membrane

    • Superb solar reflectivity

    • One coat application

    • Seamless

    • Unaffected by temperature

    • Fully flexible

    • Economical

    Type of solvent:
    White Spirit/ pma
    Approximate Flashpoint:
    40°C
    Approximate Specific Gravity:
    1.0
    Approximate Coverage:
    Average coverage is approximately 1-2kg per square metre.
    Service Temperature Limits:
    -10°C to + 85°C depending on operating conditions
    Application Temperature Limits:
    Normally 5°C to 40°C
    Chemical Resistance:

    Resistant to: most salt solutions, dilute acids and alkalis.

    Not resistant to: oils, solvents, some detergent solutions and some glass cleaning compounds

    Volume solids:
    60%
    Sizes:
    1kg, 5kg
    Full Information:
    Check out the full datasheet available in the Downloads section!

    Related Products