|   
Show categories

Showing all 3 results

  • SCHÖNOX SL

    REF:
    Smoothing and Finishing Compound
    REF:

    Description

    Cement Based Rapid Drying, Smoothing and Finishing Compound Suitable to provide a smooth finish on various substrates in interior areas. SCHÖNOX SL can be installed as a true featheredge.

    What the experts have to say

    Schonox SL
    Application
    Schonox SL is suitable for interior use only. The product can be used for patching, smoothing and leveling of: concrete, cement substrates, floor leveling compounds, gypsum substrates, old substrates such as ceramic tiles old and wooden substrates.
  • Ultra Tile Ultra Level It Super 30

    REF:
    UltraFloor Level IT Super30 is a high specification, high strength, rapid drying and curing two-part cementitious smoothing underlayment.
    REF:

    Description

    Ultra Floor Level IT SUPER 30 is a high specification, high strength, rapid drying and curing two part cementitious smoothing underlayment. It consists of a powdered component incorporating a blend of high specifications cements, with graded fillers and additives and a pre-gauged polymer liquid.

    What the experts have to say

    Internal Floors
    Level It Super 30
    Specifically designed for fast turnaround projects. Use as an underlayment for most floor coverings include sheet vinyl, LVT, linoleum & rubber and breathable textiles. Level IT SUPER30 can be applied between thicknesses of 2-15mm. Its initial set is approximately 15 minutes with a walk on time of 30 minutes.
  • Schonox FPL Plus Self Levelling Compound

    REF:
    Schonox FPL Plus is a Cement based self-levelling compound for use from 3 to 60 mm
    REF:

    Description

    Suitable for application on subfloor heating systems Schonox FPL Plus is a cement based self-levelling compound for use from 3 to 60 mm. Suitable on cement and gypsum based substrates. Designed for fast levelling in interior and exterior areas.

    What the experts have to say

    Schonox FPL Plus
    Requirements of substrate
    Substrate should have adequate strength, load bearing capacity, dimensional stability and permanent dryness. Ensure area is free of residues which reduce adhesion, e.g. dust, dirt, oil, fat and loose particles. Surface treatments or any "friable" areas of the subfloor must be mechanically removed and the subfloor repaired with SCHÖNOX levelling compounds as required.
   |   

Questions? Please contact us

Or submit our contact form