- Air & Weather Tightness
- Airtight & Weatherproof Membranes
- Airtightness Solutions
- EPDM Façade Solutions
- External Weather Seals
- Building Products
- Artificial Grass
- Breather Membranes
- Building Products
- Composite Decking Boards
- Corriboard Protection Boards
- DPC & DPM
- Drives & Pathways Solutions
- Expanding Foams
- Fibre Cement & Tile Backer Boards
- Floor Levelling Compounds
- Fortessa Door Handles & Accessories
- Impact Sound Insulation
- Joint Compounds
- Loft Ladders
- Oxide Paint
- Radon & Gas Protection
- Roofing & Bituminous Products
- Silicones & Sealants
- STEGU Decorative Stone
- Tile Adhesives & Grouts
- Tile Trims & Tools
- Torch On Membranes
- Tyvek® Building Envelope Solutions
- Acoustic Floors
- Adhesives, Screeds & DPMs
- Artificial Grass
- Carpet Tiles
- Commercial Carpet
- Commercial Vinyl
- Floor Coating Products
- Floor Repairs
- Flooring Tools & Accessories
- Impact Sound & Vibration Insulation
- Luxury Vinyl Tiles
- Rubber Flooring
- Safety Floors
- Sports Flooring – Indoor
- Static Control Flooring
- Wetroom Solutions
- Passive Fire Protection
- Resin Surfaces
- Anti-Static Resins
- Cementitious Products
- Decorative & Commercial Resin Flooring
- Decorative Quartz Resin Finishes
- Epoxy Resin Floor Coating
- Epoxy Resin Floor Screeds & Self Smoothing Finishes
- Grip/Slip Resistant Systems
- Polyurethane Floor Coatings
- Polyurethane Resin Screeds
- Resin Bound / Resin Bonded Systems
- Single Pack Floor Coatings
- Wall Coatings
- Balcony Accessories
- Bituminous Membrane Roofing Systems
- Bituminous Roofing Felts
- Cold Applied Liquid Waterproofing Systems
- EPDM Membranes
- Green Roof Systems
- High Performance Vapour Barriers
- Liquasil Roof Coatings
- Roof Slates
- Roofing Accessories
- Single Ply Membranes
- Single Ply PVC Membranes
- Single Ply RESITRIX Hybrid Membranes
- SIP Roof Panels
- Standing Seam Systems
Showing all 12 results
Bond It All Weather Roofing CompoundREF:REF:
DescriptionA general purpose, waterproof coating for all common roofing surfaces including mastic asphalt, roofing felt, corrugated iron, fibre/cement, slates, lead, copper, tin and zinc. Excellent adhesion to damp surfaces, resistance to extremes of temperature and does not crack in the cold or flow in the sun. Recommended where the threat of frost or rain precludes the use of an emulsion. Can be over coated with a suitable decorative solar reflective paint to prolong the life of the coating. Preparation All surfaces must be structurally sound,...
Bond It Bitubond Aluminium Solar Reflective PaintREF:REF:
DescriptionReduces heat build-up and gives a reflective finish to bituminous coating A light/heat reflective coating that will provide protection against solar degradation and heat gain. It is suitable for use over bituminous coatings, aged asphalt and primed steel. It is a superior alternative to chippings when applied in a two coat application. Reduces heat build-up and gives a reflective finish to bituminous coatings and primed steel. Suitable for the refurbishment of aged steel roofs.
What the experts have to saySolar Reflective PaintApplication TipSTIR VERY THOROUGHLY BEFORE USE. Do not thin. Apply immediately and continue stirring periodically during use. Apply by brush or mohair roller When brushing, use soft bristle brushes applying the lightest of pressure.
Bond It Bitubond Bitumen PaintREF:REF:
DescriptionA solvent-borne, bituminous black paint for the waterproofing and weather protecting of steelwork and concrete. Used for the protection of ferrous and non-ferrous metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood, against water. Suitable for drinking water tanks as it forms an odourless and taint-free bitumen film coating.
What the experts have to sayBitumen PaintPreparation TipThoroughly clean surfaces to be treated. Rust should be wire brushed to remove as much as possible, any residue must be primed with a rust inhibitor primer. Surfaces to be treated must be completely free of water.
Bond It Felt AdhesiveREF:REF:
DescriptionA cold applied, solvent-borne, heavy-duty adhesive for bonding all types of bituminous roofing felts to asphalt, felt, metal and concrete. It can be used for bonding mineral chippings to bituminous surfaces. Note: It may not be used over tar based products.
Bond It Rubber Bitumen EmulsionREF:REF:
DescriptionA Solvent-free, Rubberised Bitumen Emulsion Bond It Rubber Bitumen Emulsion dries to a tough, black coating providing a highly effective cold-applied, damp-proof membrane in sandwich constructions. It can also be used as a waterproof for floors, walls and other above ground structures and acts as a curing membrane when applied to green concrete. It is equally effective as an adhesive for wood blocks, wood mosaic panels, insulation boards, expanded polystyrene and cork panels, or as a plaster bonding agent on difficult surfaces. It can also...
Bond It Trowel MasticREF:REF:
DescriptionA multi-purpose, trowel grade material for waterproofing, stopping, bedding, pointing and sealing. Can be applied to most common roofing surfaces including mastic asphalt, roofing felt, corrugated iron, cast iron, fibre/cement, slates, lead, copper, zinc, concrete and timber. Fibre reinforced making it ideal for filling cracks and holes and cures to give a strong and flexible compound.
Bond It Chipping SolutionREF:REF:
DescriptionA ready-to-use, premium grade, cold-applied bitumen solution for bonding chippings to roofs that are flat or of low pitch up to a maximum of 1 in 8 fall. Has immediate resistance to rainfall and provides protection from sunlight. Can be used with chippings such as flint, gravel, limestone, granite and white calcined spar. Weatherproof finish with F.A.A rating for ignition, penetration and spread of flames.
Bond It Bitubond PrimerREF:REF:
DescriptionA Highly Penetrative, General Purpose Bitumen Primer A quality grade, highly penetrative, bituminous solution for priming surfaces prior to the application of bituminous materials and flashing tapes. Heavy duty formula making it suitable to prime concrete roofs and floors, cementitious screeds/renders, bitumen felt, weathered bitumen, mastic asphalt, corrugated iron and steel.
What the experts have to sayBitumen PrimerApplication TipApply by brush or spray. Using a brush, scrub the primer into the surface. Ensure that only a thin coat is applied and that there is no pooling. Alternatively, spray thinly and evenly. Priming should extend at least 75mm beyond the area to be waterproofed. Leave to dry for 2- 3 hours before continuing with further work. With fibre cement or dry rag based bituminous felts, apply generously to saturate the surface.
Pluvitec Pratiko MasticREF:REF:
DescriptionA Flexible Bituminous Mastic PRATIKO MASTIC is a flexible bituminous mastic reinforced with synthetic fibres which, once dry, forms a plasticized layer with excellent adhesion. PRATIKO MASTIC has an excellent adhesion and durability on bituminous surfaces, galvanized sheets, smooth and corrugated metal sheets, concrete, fibre cement, etc. which remains constant in time. The product has excellent resistance to aging, U.V. ray and atmospheric aggression. PRATIKO MASTIC can also be applied at temperatures below 0°C, on slightly humid surfaces and is compatible with all types of...
Bond It Patination OilREF:REF:
DescriptionA protective coating for new and restored leadwork. Specially designed to minimize unsightly staining on newly applied lead and other materials. Provides even colour and protects surfaces.
What the experts have to sayPatination OilPreparation TipThe lead to be treated should be clean, dry and free from cement, dust and loose debris that may affect adhesion.
Bond It SealAcrylREF:REF:
DescriptionA one component, UV stable, solvent-based, mutli-purpose roof coating membrane. Designed to prevent the ingress of water whilst allowing any trapped moisture to escape and evaporate naturally. Manufactured with fibre reinforcement pre-dispersed in the can for ease of application.
What the experts have to saySEALACRYLApplication TipDo not thin. Apply SEALACRYL using either a brush or roller. Treat all details first, in areas where excessive movement may occur additional reinforcement can be incorporated into the coating. SEALACRYL can be applied in one coat, but experience has shown that a two coat application ensures a greater uniformity of coating thickness.
Bond It Flashing TapeREF:REF:
DescriptionHigh Performance, Waterproof, Self-Adhesive Tapes Crease resistant, lead coloured self-adhesive flashing tapes for general repairs and sealing. Application: designed for use as flashing on flat and pitched roofs, on parapets and chimney stacks. Flashing Tape is also ideal for sealing around RSJs, flues, concrete columns, roof lights, guttering and extractor vents. Surfaces should be clean, dry and free from dust, with any loose particles removed with a wire brush. Rough or porous surfaces should be primed and allowed to dry before application.