|   
Show categories
Need Advice? Call Us Now 01 6426600 or
Request A Call Back
or
Email Us

Showing all 7 results

  • Bond It Cyanoacrylate Accelerator

    REF:
    REF:

    Description

    An accelerator to improve the rate of cure of viscous, gap filling cyanoacrylate adhesives (superglues). Cyanoacrylate Accelerator improves bonding to difficult surfaces such as slightly acidic materials, prevents penetration of adhesive into porous materials. Improves the cure of adhesive fillets. Application For difficult surfaces apply the CYANOACRYLATE ACCELERATOR first. For fillets apply the superglue first. Ultimate speed depends on adhesive type and viscosity. IMPORTANT: Over application of the accelerator can result in staining on some materials. This stain may not become visible for several hours...
  • Bond It Mitre Kit Adhesive

    REF:
    REF:

    Description

    A high strength bonding system comprising a cyanoacrylate adhesive with an aerosol activator to ensure full and rapid curing on acid surfaces. Can be used for bonding MDF, wood, rubber and most plastics. Instant bonding properties considerably reduce assembly times for mitre joints especially where precision instant bonding is required. Cures in approximately 10 seconds. Pack includes 1 tin of Activator (200ml) and 1 bottle of HVC Superglue (50g).
  • Bond It A43 Threadlock

    REF:
    REF:

    Description

     A medium viscosity, medium strength screw and thread-locker. Used as a locking compound for direct application to lightly oiled components. Replaces spring washers and lock nuts. Removable using the correct tools. Also prevents rusting or corrosion. Non-drip consistency for clean, economic application. Use Bond It A43 THREADLOCK can be used as a locking compound for direct application to lightly oiled components, thus reducing the need for pre-treatment. Also suitable as a standard anaerobic threadlocker for fine to medium pitch threads. Preparation Remove heavy oil and...
  • Bond It A70 Studlock

    REF:
    REF:

    Description

    A high strength, anaerobic adhesive for the permanent retention and sealing of threaded fasteners, sleeves and bearings. It is resistant to fuels, oils, hydraulic & refrigeration fluids. Also acts as a lubricant during assembly to ensure accurate torqueing and protection against corrosion. Prevents rusting or corrosion and cannot be dismantled once adhesive has set. Uses Bond It A70 STUDLOCK can be used for fixing and sealing of plugs, through bolts and studs into castings, etc. It eliminates split pins, double nutting and spot welds and...
  • Bond It HVC Cyanoacrylate Glue

    REF:
    A high viscosity cyanoacrylate adhesive developed for bonding rubber and plastics including PVCu
    REF:

    Description

    A high viscosity cyanoacrylate adhesive developed for bonding rubber and plastics including PVCu. For use on porous surfaces. Also has gap-filling properties making it ideal for bonding trims and caps on PVCu windows as well as rubber, wood, metal, ceramics, MDF, leather, porcelain and card. Set time range 10 to 30 seconds.
  • Bond It RGC Cyanoacrylate Glue

    REF:
    A medium viscosity superglue that fills gaps to 0.1mm
    REF:

    Description

    A medium viscosity superglue that fills gaps to 0.1 mm. Fast setting at room temperature and is economical to use, ideal for perfect fit surfaces where rapid setting is required. Suitable for close fir non-porous substrates e.g. most plastics, metals, glass, PVCu, rubber and EPDM. Set time 5 to 15 seconds.
  • Bond It Floorbond MPA

    REF:
    REF:

    Description

    A light coloured, solvent-free, acrylic emulsion adhesive. The adhesive has a long open time with early tack development, is non staining and has excellent resistance to plasticiser migration. Bond It MPA is recommended for installing vinyl sheet and tile coverings, cushion floor, PVC and PU foam backed carpets, the majority of other carpets and needle punch / fibre bonded carpets.  
   |   

Questions? Please contact us

Or submit our contact form